In part 3 of the DIY Arduino series, James solders, turns on, and, debugs the Pyramiduino! In this episode you can see how to solder parts with a toaster oven, test a board with a scope, and program an Arduino bootloader. Episode #27 Show Notes and Links Support AddOhms on Patreon Order Pyramiduino R5 from OSHPark JEDEC Reflow Profile via Diodes Inc. MG Chemicals Low-Temp Solder Paste via Digi-Key FTDI Friend from Adafruit Coin Acceptor…
This video is part of a 3 part series, with the other two parts coming in the future. When it’s time to design a custom PCB for your project, you might be wondering how to design in an Arduino. This video shows the pieces that go into the schematic. The next video will show how to layout the PCB. And after the boards come back, I will show how to turn it on. Related Videos…
Part two of the DIY Arduino series. In this video, we create the PCB. Also, the project gets a new name: Pyramiduino. Watch the process to make a PCB in KiCad. And the Bald Engineer gives you a challenge, can you find the unconnected nets before he does? Check out Part 1 – the Schematic and subscribe to see when Part 3 – Turn On is posted. DIY Arduino PCB in KiCad Show Notes Pyramiduino…