AddOhms by Bald Engineer
Category

PCBs

Category
KiCad

DIY Arduino Turn-On and Debug | #27

In part 3 of the DIY Arduino series, James solders, turns on, and, debugs the Pyramiduino! In this episode you can see how to solder parts with a toaster oven, test a board with a scope, and program an Arduino bootloader. Episode #27 Show Notes and Links Support AddOhms on Patreon Order Pyramiduino R5 from OSHPark JEDEC Reflow Profile via Diodes Inc. MG Chemicals Low-Temp Solder Paste via Digi-Key FTDI Friend from Adafruit Coin Acceptor…

KiCad

DIY Arduino PCB in KiCad | #24

Part two of the DIY Arduino series. In this video, we create the PCB. Also, the project gets a new name: Pyramiduino. Watch the process to make a PCB in KiCad. And the Bald Engineer gives you a challenge, can you find the unconnected nets before he does? Check out Part 1 – the Schematic and subscribe to see when Part 3 – Turn On is posted. DIY Arduino PCB in KiCad Show Notes Pyramiduino…

Exit mobile version