In part 3 of the DIY Arduino series, James solders, turns on, and, debugs the Pyramiduino! In this episode you can see how to solder parts with a toaster oven, test a board with a scope, and program an Arduino bootloader. Episode #27 Show Notes and Links Support AddOhms on Patreon Order Pyramiduino R5 from OSHPark JEDEC Reflow Profile via Diodes Inc. MG Chemicals Low-Temp Solder Paste via Digi-Key FTDI Friend from Adafruit Coin Acceptor…

Part 3: Common Circuit Schematics https://www.youtube.com/watch?v=VfkSzvXPYak The third part in a three part series on reading Electronic Schematics. Using the Arduino Uno reference design as an example, we look at common circuits we might find when reading a schematic. Part 1: Passive ComponentsPart 2: Active Components

Exit mobile version