In part 3 of the DIY Arduino series, James solders, turns on, and, debugs the Pyramiduino! In this episode you can see how to solder parts with a toaster oven, test a board with a scope, and program an Arduino bootloader. Episode #27 Show Notes and Links Support AddOhms on Patreon Order Pyramiduino R5 from OSHPark JEDEC Reflow Profile via Diodes Inc. MG Chemicals Low-Temp Solder Paste via Digi-Key FTDI Friend from Adafruit Coin Acceptor…
This week the bald engineer unboxes swag from electromaker.io, programs the Adafruit Coin Accepter, with a Pyramiduino, and answers questions…
The primary tool I use to create AddOhms animations is Adobe After Effects. In this live stream, I take you…
A common question that comes up about pull-up resistors: what value do you pick and why not just use a…
This video is part of a 3 part series, with the other two parts coming in the future. When it’s…
We take a look at EAGLE 9.0. This release was a major update since Autodesk took over the project. To…
Part two of the DIY Arduino series. In this video, we create the PCB. Also, the project gets a new…
To be upfront, I am not a subscriber anymore. The owner of the company has a history of berating customers…
Previously, we looked at resistor voltage dividers. Sometimes I get questions about using these instead of regulators. In this video,…
